17
LIGHTING SYSTEM, INSTRUMENTS
118
17.3.2
Activation and test
400313-01
Activating the speedometer
The speedometer is activated when one of the buttons is pressed or an impulse comes
from the wheel speed sensor.
Display test
To enable you to check that the display is functioning properly, all display segments
light up briefly.
400314-01
WS (wheel size)
After the display function check, the wheel size
WS
is displayed briefly.
Info
The number 2205 equals the circumference of the 21" front wheel with stan-
dard tires.
The display then changes to the last selected mode.
17.3.3
Setting kilometers or miles
Info
If you change the unit of measure, the
ODO
value is retained and converted accordingly.
The values
TR1
,
TR2
,
A1
,
A2
and
S1
are cleared when the unit of measure is changed.
Condition
The motorcycle is stationary.
400329-01
–
Press the button
briefly and repeatedly until
H
appears at the bottom right of the
display.
–
Press the button
for 3 - 5 seconds.
The Setup menu is displayed and the active functions are shown.
–
Press the button
repeatedly until the
Km/h
/
Mph
display flashes.
Adjusting Km/h
–
Press the button .
Adjusting Mph
–
Press the button .
–
Press the button
for 3 - 5 seconds.
The settings are stored and the Setup menu is closed.
Info
If no button is pressed for 20 seconds, or if no impulse comes from the
wheel speed sensor, the settings are automatically saved and the Setup
menu is closed.
17.3.4
Adjusting the speedometer functions
Info
When the vehicle is delivered, only the
SPEED/H
and
SPEED/ODO
display modes are activated.
Condition
The motorcycle is stationary.
