6
FORK, TRIPLE CLAMP
22
200685-10
–
Measure the run-out of the inner tube.
Inner tub run-out
≤
0.20 mm (
≤
0.0079 in)
» If the measured value is greater than the specified value:
–
Change the inner tube.
200632-10
–
Check the outer tube for damage.
» If there is damage:
–
Change the outer tube.
200665-10
–
Check the surface of the sliding bushing.
» If the bronze-colored layer
A
under the sliding layer
B
is visible:
–
Replace the sliding bushing.
200666-10
–
Check the spring length.
Guideline
Spring length with preload spacer(s)
Weight of rider: 65… 75 kg (143…
165 lb.)
513 mm (20.2 in)
Weight of rider: 75… 85 kg (165…
187 lb.)
513 mm (20.2 in)
Weight of rider: 85… 95 kg (187…
209 lb.)
513 mm (20.2 in)
» If the measured value is greater than the specified value:
–
Reduce the thickness of the preload spacer.
» If the measured value is less than the specified value:
–
Increase the thickness of the preload spacer.
6.1.17
Assembling the compression damping fitting
Info
The steps are identical for both fork legs.
200704-11
–
Clamp the compression damping fitting in a bench vise using soft jaws.
–
Mount O-ring
1
and seal ring
2
.
–
Grease the O-ring.
Lubricant (T158) (
