22
EXHAUST CONTROL
198
22.1
Engine characteristic - setting the auxiliary spring
Warning
Danger of burns
Some vehicle components become very hot when the vehicle is operated.
–
Do not touch hot components such as exhaust system, radiator, engine, shock absorber, and the brake system. Allow these
components to cool down before starting work on them.
Preparatory work
–
Tilt the motorcycle approx. 45º to the left and secure it to prevent it from falling.
B00057-10
Main work
–
Remove screws
1
.
B00056-11
–
Take cap
2
, adjusting spring
3
, auxiliary spring
4
, and spring insert
5
out of the
clutch cover.
–
Pull both springs off of the spring insert.
B00058-10
–
Mount the required auxiliary spring
4
and adjusting spring
3
and slide them into
the clutch cover together.
Auxiliary spring with yellow marking (54637072300)
Auxiliary spring with green marking (54837072100)
Auxiliary spring with red marking (54837072000)
The recess in spring insert
5
engages in the angle lever.
Info
Screw
6
must not be turned as this would worsen the engine characteristic.
–
Check the O-ring in the cap.
–
Position the cap.
–
Mount and tighten the screws.
Guideline
Screw, exhaust control cover
M5
6 Nm (4.4 lbf ft)
