9
SHOCK ABSORBER, SWINGARM
80
303612-10
–
Position the new heim joint.
–
Mount special tool
4
.
Mounting tool, heim joint (50329000044) (
–
Press in the heim joint by screwing in the screw.
303610-10
–
Press in shaft seal rings
3
on both sides with the open side facing inward.
Info
The heim joint for the shock absorber at the swing arm is Teflon coated. It
must not be greased with grease or with other lubricants. Lubricants dis-
solve the Teflon coating, thereby drastically reducing the service life.
303609-10
–
Mount spacers
2
on both sides.
303608-10
–
Position the shock absorber.
–
Mount and tighten screw
1
.
Guideline
Screw, bottom shock
absorber
M12
80 Nm
(59 lbf ft)
Loctite
®
2701™
Info
Raise the wheel slightly to make it easier to mount the screw.
Finishing work
–
Remove the motorcycle from the lift stand. (
