17
LIGHTING SYSTEM, INSTRUMENTS
117
17.1
Checking the headlight setting
400726-10
–
Position the vehicle upright on a horizontal surface in front of a light wall and make
a mark at the height of the center of the low beam headlight.
–
Make another mark a distance
B
under the first mark.
Guideline
Distance
B
5 cm (2 in)
–
Position the vehicle vertically a distance
A
away from the wall.
Guideline
Distance
A
5 m (16 ft)
–
The rider now sits down on the motorcycle.
–
Switch on the low beam.
–
Check the headlight setting.
The boundary between light and dark must be exactly on the lower mark for a
motorcycle with driver.
» If the light-dark border does not meet specifications:
–
Adjust the headlight range. (
17.2
Adjusting the headlight range
Preparatory work
–
Check the headlight setting. (
602764-10
Main work
–
Loosen screw
1
.
–
Adjust the headlight range by swiveling the headlight.
Guideline
The boundary between light and dark must be exactly on the lower mark for a
motorcycle with driver (instructions on how to apply the mark: Checking the
headlight setting).
Info
The headlight range may need to be corrected if luggage is carried on the
vehicle.
–
Tighten screw
1
.
17.3
EXC EU/AUS, XC
‑
W
17.3.1
Speedometer overview
400312-01
–
Press the button
to change the display mode or change to one of the Setup
menus.
–
Press the button
to control different functions.
–
Press the button
to control different functions.
Info
When the vehicle is delivered, only the
SPEED/H
and
SPEED/ODO
display modes
are activated.
