14
WHEELS
95
B01554-10
Main work
–
Press the brake caliper onto the brake disc by hand in order to push back the brake
piston.
Info
Make sure when pushing back the brake piston that you do not press the
brake caliper against the spokes.
–
Remove nut
1
.
–
Remove chain adjuster
2
. Withdraw wheel spindle
3
only enough to allow the rear
wheel to be pushed forward.
–
Push the rear wheel forward as far as possible. Remove the chain from the rear
sprocket.
Info
Protect the motorcycle and its attachments against damage by covering
them.
–
Holding the rear wheel, withdraw the wheel spindle. Take the rear wheel out of the
swingarm.
Info
Do not operate the foot brake when the rear wheel is removed.
Always lay the wheel down in such a way that the brake disc is not dam-
aged.
101390-10
–
Remove spacers
4
.
14.6.2
Installing the rear wheel
Warning
Danger of accidents
Reduced braking efficiency due to oil or grease on the brake discs.
–
Always keep the brake discs free of oil and grease, and clean them with brake cleaner when necessary.
101390-11
Main work
–
Check the wheel bearing for damage and wear.
» If the wheel bearing is damaged or worn:
–
Change the wheel bearing.
–
Clean and grease shaft seal rings
1
and bearing surface
A
of the spacers.
Long-life grease (
–
Insert the spacers.
B01555-10
–
Lift the rear wheel into the swing arm, position it, and insert wheel spindle
2
.
–
Apply the chain.
