Krone 5XL-GD, Operating Instructions Manual

Page: 93 / 126

VI - 13
Maintenance
6.10.2 Distance scraper to drum
The scrapers (2) must be at a distance „A“ from the
rotating conveyor drum (3).
Adjusting the distance from the cutter to the drum
• Slacken all screws (1) on the scraper bar on the right
and left.
• Twist the whole scraper bar until the distance A = 3-5
mm.
• Tighten the screws
At the end of the season stop plate (1) must be checked
for wear.
If the thickness of the stop plate
(t=6mm) should be reduced by 50%, the
plate must be replaced (PN 334 975-2).
6.10.1 Distance cutters to drum
The distance between the blades and
the drum is set at the factory to the
correct value and must not be varied.
KDW04040
1
2
KLW09110
1
XXL00004
6XL00015
10-12 mm