Krone 5XL-GD, Operating Instructions Manual

Page: 39 / 126

IV - 1
Comfort Control Unit
4 Comfort Control Unit
4.1 General Description
The electronic equipment of the machine consists
essentially of the job computer (1), the electronics for
the hydr. axle suspension (2) (optional), and the control
unit (3) and the control and functional elements.
The job computer (1) and the electronics for the hydr.
axle suspension(2) are located at the front left on the
machine under the front hood.
Their functions are:
– Control of the loading and unloading process
– Load counter
– Control of the actuators installed on the machine
– Transfer of alarm messages
– Sensor/actuator diagnostics
The control unit (3) communicates information to the
driver and performs settings to operate the loader . This
information is received and further processed by the job
computer.
The control unit (3) has to be protected
from water.
If the machine will not be used for an
extended period (as in winter, for
example), the control unit (3) has to be
stored in a dry place.
For mounting and repair jobs, especially
for welding jobs on the machine,
disconnect the power supply from the
control unit (3).
Overvoltage can damage the electronics
of the control unit.
L400461
1
2
ZX000002
3