Krone 5XL-GD, Operating Instructions Manual

Page: 43 / 126

IV - 5
Comfort Control Unit
Description of the keys
Keys 1-8
The keys 1-8 are used to activate the softkeys located
in the right columns. For the assignment of the keys,
see the two illustrations.
If there is no softkey next to the key, it has no
function.
Rotary potentiometer
The rotary potentiometer has two functions:
1. The rotary potentiometer can be turned to change
settings and to select the desired menu in the menu
level.
2. The settings are saved by pressing the rotary
potentiometer.
Keys A-D
The keys A-D are used to activate the softkeys located
in the line just above them. For the assignment of the
keys, see the illustration.
If there is no softkey above the key, the key has no
function.
Key E
The key can be used to bring up the menu.
Key F
You can use the key to go to the previous screen
or the menu level above the current one. Holding the
key down slightly longer takes you back to the basic
screen.
4.4 Operational Readiness
Switching on
• Press the key.
After you have switched the unit on, the connection to
the job computer is established.
If it is not possible to set up a connection, data
connection interrupted, the message shown on the right
appears in the display.
If the connection is established, the basic screen
appears in the display after a brief time (see Chapter 5.5.1).
BPK41011
Zx000005
ZX000006
ZX000007