III - 16
Operation
KDW03210
1
• Arrest the short-cut feeder wagon by applying the
parking brake (1).
3.11
Shutting down
No person is permitted within the
danger area.
The short-cut feeder wagon must not be
loaded when shutting down
When shutting down the short-cut feeder wagon, proceed
as follows:
• Raise the wagon slightly using the articulated tow-bar.
• Extend the stabilising foot (1) and secure with pins (7).
In order to make it easier to insert the
pins (7), adjust the lock nuts on the
threaded rod (8) so that the holes in the
inner and outer tubes of the stabiliser foot
(1) are exactly aligned.
• Carefully lower the articulated tow-bar until the stabiliser
foot (1) rests on the ground.
• Switch the hydraulic system to non-pressurised.
• Disconnect the hydraulic hoses (5) and (6) from the
tractor.
• Disconnect the compressed air hoses (3) and (4).
Stow the disconnected hydraulic hoses
(5) and (6) in the retainer brackets on the
articulated tow-bar provided for the
purpose in order to prevent the couplings
from becoming contaminated.
Use the caps to close the ends of the
hoses.
• Disconnect the electrical connections.
KLW08130
3
1
2
6
5
4
7
8
Summary of Contents for 5XL-GD
