Krone 5XL-GD, Operating Instructions Manual

Page: 107 / 126

A - 1
Appendix
A1 Initial hitch up
For transport reasons, the feeder wagon is supplied without the articulated shaft attached and with the covers not
fully assembled. Before commissioning, the feeder wagon must be fully assembled and adapted to suit the type of
tractor used to tow it.
The following parts are supplied loose. These parts must be stowed in the storage compartment of the wagon.
1 Articulated shaft
2 Control
3 Electrical cable for lights
4 Paint spray can
5 Operating instructions
7 Fittings (in the box)
not in the picture:
tarpaulin (in case of third metering roller) (1 piece)
tube for tarpaulin (in case of third metering roller) (1
piece)
rod for tarpaulin (in case of third metering roller) (1
piece)
retainer (in case of third metering roll) (1 piece)
assembly-ropes (22 pieces)
cable
wiring harness terminal connection (optional)
retainer for control unit comfort(optional)
retainer with suction foot (optional)
lever
6XL00010
1
4
5
7
3
2