Konica Minolta bizhub 36 User Manual Download Page 60

Page: 60 / 195

bizhub 42/36

6-4

6.1

Operation flow

6.1.2

Internet Fax

The following describes the operation flow for using Internet Fax function.

Press [Fax] in the home screen or

Fax

on the

Control Panel

Specify the destination.

Address Book (p. 6-14)

Direct Input (p. 6-11)

Log (p. 6-13)

Configure Scan Settings (p. 6-18), Original Set-
tings (p. 6-25) and Communication Settings
(p. 6-21).

Load the original.

•

Do not load more than 50 sheets and up to the point where the top of the stack is higher than the

mark at one

time. Such an action may cause an original paper jam or damage to the original. It may also invite machine failure.
However, an original that exceeds 50 pages can be scanned in separate batches.

Summary of Contents for bizhub 36



































































































































































































Search results

Summary of Contents for bizhub 36

Reviews:

Related manuals for bizhub 36

Brands by name

Popular brands

Konica Minolta bizhub 36, User Manual

Search results

Summary of Contents for bizhub 36

Reviews:

Related manuals for bizhub 36

Brands by name

Popular brands