Konica Minolta bizhub 36, User Manual

Page: 13 / 195

bizhub 42/36 2-2
2.1 Information 2
2 Before using the Fax function
This section describes necessary information you should be aware of before using the fax function of this
machine.
2.1 Information
7 CAUTION
- To turn the Power Switch off and on, first turn the power off, and then on again after 10 or more sec-
onds has elapsed. Not doing so may result in an operation failure.
Reference
- To use the fax function, the optional
Fax Kit FK-509
is required.
The Fax Kit FK-509 may not be available depending on the sales area.
- Fax data cannot be sent/received in color with this machine.
2.1.1 Fax function
Function type
Using this machine, scanned images can be sent or received via network or telephone line. This User's Guide
introduces the following functions.
- Fax (G3) function
- Internet Fax (I-FAX) function
- PC-FAX function
Notes on using fax (G3)/PC-FAX functions
This machine can connect to the following telephone lines.
- Subscribed telephone lines (including facsimile communication networks)
- PBX (Private Branch exchange, 2-wire)
Check the following for the telephone line to be used.
- You cannot connect a business phone as an external telephone.
- If a digital dedicated line is multiplexed in an enterprise network, fax transmission speed may be limited,
or the Super G3 fax may not be available.
Communication error may occur on rare occasions due to the factory default setting. This is because the mul-
tiplex device limits the frequency band of the line to the utmost limit based on the assumption that the line is
intended for voice communication. Also, these restrictions differ depending on the device that make up the
network. For details, contact your network administrator.