Konica Minolta bizhub 36, User Manual

Page: 182 / 195

bizhub 42/36 14-4
14.2 Glossary 14
14.2 Glossary
This section describes the general terms used in the fax communications.
Explanations may be given of the terms of functions that are not included in this machine.
Term Description
10Base-T/
100Base-TX/
1000Base-T
A set of specifications under the Ethernet standards. Those cables that con-
sist of twisted copper wire pairs are used. The transmission rates are
10Mbps with 10Base-T, 100Mbps with 100Base-TX and 1000Mbps with
1000Base-T.
Address Book A function of registering frequently used fax numbers of recipients. When
registering abbreviated addresses, you should also register the destination
name and the search string, so that you can specify the destination using the
search string to select.
Background Removal A function to adjust the shading of background color before sending the doc-
ument.
Batch transmission A function to send documents as one document at a specified time if the
documents have the same transmission conditions such as destination,
transmission time, memory transmission or resolution, and are stored in the
same memory.
Baudrate Baudrate indicates, for the fax, the transmission rate of a modem.
This machine can communicate at a high transmission rate of 33,600bps.
Binding Position A function to specify the binding position of a double-sided document when
it is sent using
ADF
. Two types of binding positions are available for a dou-
ble-sided document: One is the top and bottom binding with the binding po-
sition at the top or bottom of the document. The other is left and right binding
with the binding position at the left or right of the document. Note that the
second side of the document has a different top or bottom relation.
bit The abbreviation for binary digit. The smallest unit of information (data quan-
tity) handled by a computer or printer. A bit uses only a 0 or a 1 to indicate
data.
BMP The abbreviation for bitmap. This is a file format for saving image data. (The
file extension is ".bmp".)
Commonly used on Windows platforms. BMP covers the color depth from
monochrome (2 values) to full color (16,777,216 colors). BMP images are not
suitable for compressed storage.
BOOTP The abbreviation for Bootstrap Protocol. The protocol is used for a client
computer on the TCP/IP network to load network configuration automatically
from a server. Instead of BOOTP, DHCP, an advanced protocol based on
BOOTP, is typically used today.
bps The acronym for bit per second,
which is a unit of data transmission, indicating the amount of data transmit-
ted per second.
Brightness Brightness of a display or other screen.
Broadcast A transmission of a single document to many recipients in one operation.
Bulletin board A function of posting documents to be viewed, or stores the documents to
be transmitted via polling.
Byte A byte indicates a unit of information (data quantity) handled by a computer
or printer. A byte consists of eight bits.
Check Dest. & Send A function to send a fax after comparing the specified fax number with the
fax number information of the recipient (CSI). Only when those numbers
match, the function sends the fax. If the numbers are not matched, a trans-
mission error occurs.Therefore, this prevents misdirected transmissions. The
sender's fax number must be correctly registered with recipient's machine.
Client A computer using services provided by servers via the network.
Closed Network RX A function to accept only transmissions from recipient machines with a
matching password.