Komatsu HB215LC-3, Operation & Maintenance Manual

Page: 412 / 492

1.
Remove the nut (2) of breather assembly (1) at the top of
the hydraulic tank.
2.
Remove the cover (3).
3.
Replace the filter element (4) with a new one.
4.
Install the cover (3) and nut (2).
Tightening torque of the nut (2):10 to 14 Nm {1.0 to
1.4 kgm}
NOTICE
If the breather assembly (1) is removed for replace-
ment, apply a tool to the bolt (5) and tighten it.
Tightening torque:30 to 40 Nm {3.1 to 4.1 kgm}
METHOD FOR REPLACING DEF TANK BREATHER ELEMENT
k k
WARNING
Do not replace the element immediately after engine is stopped.
NOTICE
• Komatsu recommends using Komatsu genuine parts for replacement parts.
• If the machine is operated without DEF tank breather element attached, or with the element other
than Komatsu genuine parts, foreign materials may enter into DEF pump and DEF injector which
will cause failure of the machine. Never operate the machine without DEF tank breather element at-
tached, nor use the element other than Komatsu genuine parts.
• Do not flush DEF tank breather element. Flushing or regenerating of it will degrade the performance
of element, and will cause the breakage of DEF tank. Never reuse the DEF element.
• Always stop the engine and clean around DEF tank before replacing.
• After the engine is stopped, DEF system devices automatically purge DEF in DEF injector and DEF
pump and return it to DEF tank to prevent malfunction of the devices caused by freezing of DEF or
deposition of urea.
After the engine is stopped, the devices are operated for a few minutes. Replace the element after
DEF system devices stop.
• Improper assembly of DEF tank breather element may cause leakage of DEF. Replace the element in
the correct procedure.
1.
Open DEF tank cover at the right of the machine upward.
MAINTENANCE PROCEDURE MAINTENANCE
4-68