Komatsu HB215LC-3, Operation & Maintenance Manual, Page: 466 / 492

ATTACHMENTS AND OPTIONS
k k
WARNING
• Read the instruction manual for the attachment and the sections of this manual related to attach-
ments and options.
• Installing any attachment or optional equipment is related to the safety issue. Contact your Komat-
su distributor before installing.
• Installing attachments or optional equipment without consulting your Komatsu distributor may not
only cause problems with safety, but may also have an adverse effect on the operation of the ma-
chine and the life of the equipment.
• Any personal injuries, product failures, physical loss or damage resulting from the use of unauthor-
ized attachments or parts will not be the responsibility of Komatsu.
INSTALL ATTACHMENT
k k
WARNING
Depending on the type or combination of work equipment, there is a danger that the work equipment
may hit the cab or machine body.
When using unfamiliar work equipment for the first time, check before starting if there is any danger of
interference, and operate it with care.
HB215LC-3
NOTICE
• When the boom is fully lowered during oblique digging, the boom interferes with the undercarriage.
Operate the boom carefully.
NOTE:
1. Bucket size based on ISO 7451, heaped material with a 1:1 angle of repose.
Max Bucket Volume/Weight are for reference only and are not necessarily available from the factory.
2. Table is based on General Purpose buckets and both conditions of Volume (m
3
) and Weight (kg) must not be
exceeded.
Please consult with your distributor for the correct selection of buckets and attachments to suit the application.
The recommendations are given as a guide only, based on typical conditions.
• For digging or loading hard soil or soft rock, it is recommended that the strengthened bucket with high dura-
bility and high wear resistence be employed.
HB215LC-3
Max Bucket Volume/
Weight ISO
1-Piece Boom
2.4 m 2.9 m
Bucket 1.2 t/m
3
m
3
/ kg
1.68 / 1200 1.65 / 1150
Bucket 1.5 t/m
3
m
3
/ kg
1.53 / 1100 1.40 / 1025
Bucket 1.8 t/m
3
m
3
/ kg
1.30 / 1000 1.22 / 800
Values shown are in accordance with EN474-5:2006+A1:2009 (E)
TRACK SHOES SELECTION
Select the appropriate track shoe to match the operating conditions.
ATTACHMENTS AND OPTIONS ATTACHMENTS AND OPTIONS
6-32