Komatsu HB215LC-3, Operation & Maintenance Manual

Page: 157 / 492

1.
Select “Operator ID” (5) on the “Monitor Setting” menu
screen, then press switch F6 for 1 second.
2.
The “Operator ID Change” screen is displayed.
• Input the already registered ID on the “Operator ID
Change” screen and press F6. Then, the identified ID
can be changed.
A message is displayed below and the screen returns
to the “Monitor Setting” menu screen.
On the “Monitor Setting” menu screen, the inputted ID
is displayed in the column of “Operator ID”.
• When you press switch F1 on the “Operator ID
Change” screen, a message is displayed below and
the screen returns to the “Monitor Setting” menu
screen.
On the “Monitor Setting” menu screen, as the same
way when the starting switch is ON and “SKIP” is se-
lected, “****” is displayed in the column of “Operator
ID”.
In this case, the operator ID is not identified.
• When you press switch F6 after inputting the ID which
is not registered to the “Operator ID Change” screen,
a message is displayed below and the screen returns
to the “Monitor Setting” menu screen.
In this case, the identified ID is not changed.
• On the “Operator ID Change” screen, if no switch is
operated for more than 30 seconds, the screen auto-
matically changes to the “Monitor Setting” menu
screen.
In this case, the identified ID is not changed.
OPERATION EXPLANATION OF COMPONENTS
3-85