Komatsu HB215LC-3, Operation & Maintenance Manual

Page: 262 / 492

Working
mode
Applicable operations
ATT/P mode
Operations of 2-way attachment such as crusher,
etc.
(production conscious operation)
ATT/E mode
Operations of 2-way attachment such as crusher,
etc.
(fuel consumption conscious operation)
NOTICE
Do not perform the breaker operations in any mode other than the breaker mode. Otherwise, the hy-
draulic component may break.
Set the working mode according to the following procedure.
1.
Press the working mode selector switch (1).
The screen changes to the working mode selection
screen.
2.
Press the working mode selector switch (1) or switch F3 or
F4 to select the appropriate mode.
3.
Select a desired working mode and press the switch F6.
The change is entered and the screen returns to the stand-
ard screen.
If switch F5 is pressed, the screen returns to the standard
screen without changing the mode.
• If a working mode is selected, and nothing is done for 5 seconds, the selected working mode is auto-
matically accepted and the screen returns to the standard screen.
• If a working mode is selected and the working mode selector switch (1) is kept pressed, the selected
mode is accepted and the screen returns to the standard screen.
MACHINE OPERATIONS AND CONTROLS OPERATION
3-190