manualshive.com logo in svg

Komatsu HB215LC-3, Operation & Maintenance Manual, Page: 258 / 492

Share
Download
Komatsu HB215LC-3 Operation & Maintenance Manual Download Page 258

• (A): Turning FORWARD LEFT

Push the right travel lever forward.
The machine turns forward LEFT.

• (B): Turning REVERSE LEFT

Push the right travel lever backward.
The machine turns in reverse LEFT.

REMARK

When  turning  to  the  RIGHT,  read  the  preceding  procedure  by
replacing the word "LEFT" with "RIGHT", then operate the left
travel lever.

CHANGE DIRECTION OF MACHINE

When turning LEFT during straight travel

• (A): Forward left turn

Return  the  left  travel  lever  from  FORWARD  to  NEUTRAL
position.
The machine turns forward LEFT.

• (B): Reverse left turn

Return  the  left  travel  lever  from  REVERSE  to  NEUTRAL
position.
The machine turns in reverse LEFT.

REMARK

When turning to the forward RIGHT, return the right travel lever
from FORWARD to NEUTRAL position. When turning to the re-
verse  RIGHT,  return  the  right  travel  lever  from  REVERSE  to
NEUTRAL position.

MACHINE OPERATIONS AND CONTROLS

OPERATION

3-186

Summary of Contents for HB215LC-3













































































































































































































































































































































































































































































































Reviews:

No comments