manualshive.com logo in svg

Komatsu HB215LC-3, Operation & Maintenance Manual, Page: 250 / 492

Share
Download
Komatsu HB215LC-3 Operation & Maintenance Manual Download Page 250

14. Repeat the following operation slowly 3 to 5 times before

starting actual work.
Circulate the warm hydraulic oil through all control circuits.

• Boom operation: RAISE (E) ←→ LOWER (F)
• Arm operation: IN (B) ←→ OUT (A)
• Bucket operation: CURL (D) ←→ DUMP (C)
• Swing operation: LEFT (G) ←→ RIGHT (H)

When  performing  the  swing  operation,  release  the
swing  lock  switch  (2),  check  that  the  swing  lock  pilot
lamp (24) is not lit, then perform the swing operation.

• Travel (Lo) operation: FORWARD (A) ←→ REVERSE

(B)

• For  the  attachment  operations  (if  equipped),  change

the working mode to the attachment mode.

MACHINE OPERATIONS AND CONTROLS

OPERATION

3-178

Summary of Contents for HB215LC-3













































































































































































































































































































































































































































































































Reviews:

No comments