Komatsu HB215LC-3, Operation & Maintenance Manual, Page: 231 / 492

1.
Adjust stay (1).
Mounting position (2): 77 mm
Mounting angle (3): 89 °
Mounting angle (4): 107 °
Tightening torque of mounting bolt (5): 6.0 to 7.0 Nm {0.61
to 0.71 kgm}
2.
Adjust the mirror (6).
Tightening torque of mounting bolt (7): 6.0 to 7.0 Nm {0.61
to 0.71 kgm}
Mounting position (8): 172 mm
NOTICE
• Tighten the right and left bolts of each bracket al-
ternately so that their right and left clearances (R)
and (L) become equal.
• If the mirror and stay mounting bolts are tightened
excessively, the bracket will be damaged. Tighten
the bolts to the specified torque.
Adjust the mirror so that the side of the machine is reflec-
ted in it as shown in the figure.
OPERATION MACHINE OPERATIONS AND CONTROLS
3-159