www.kolidainstrument.com
82
2) Select
LINE
LINE
Line
1. Stn data
2. Back sight data
3. Define baseline
4. Point
5. Line
3) Select “1. Stn data.”, the station data can be
manually input or read in by pressing READ key.
PressOK, return to the “Set-Out Line screen.”
Set
Stn data
REC Stn(1/4)
N0 ： 0.000 m
E0 ： 0.000 m
Z0 ： 0.000 m
Stn ： STN2
Inst.h： 0.000 m
REC. READ OK
4) Select “3. Define Baseline”.
It is possible to press READ, to read in the
known data which is stored in memory,
Or manually input: input the start point and end
point data and press OK.
Define
baseline
Define baseline
Nb1: 11.000 m
Eb1: 22.000 m
Zb1: 33.000 m
READ REC. OK
Define baseline
Nb2: 1.000 m
Eb2: 2.000 m
Zb2: 3.000 m
READ REC. OBS. OK
5) Total station will calculate the distance and scalre
factor out.
press F4 key to enter page 2
Press Sy=1 to set scale factor Y to 1.
Press [1
：
**] to change the grade display mode
1
：
** = elevation : horizontal distance
OK
Define baseline
Azimuth 243°26′05″
Hcalc 22.361m
Hmeas
OK P1
Define baseline
Scale X: 1.000000
Scale Y: 1.000000
SLOP : -134.164%
OK Sy=1 Sy=Sx P2
6) Press OK to define the baseline and return to
previous menu.
Line
1. Stn data
2. Back sight data
3. Define baseline
4. Point
5. Line
