www.kolidainstrument.com
100
2) Start receiving software in computer, when total
station displays “Ready? ”, press OK.
(if you select USB communication then it shows
“initializating USB”)
OK
Receive HZ AL
Ready
？
OK
3) If any alignment data is existed in memory, it will
display “Overwrite file?” Press YES to begin
receiving, press NO to exit.
If there is no alignment data, this step will be
skipped.
YES
Receive HZ AL
Overwrite file
？
NO YES
4) Start receiving. To stop receiving, press STOP.
Receive HZ AL
Transfer
: COM
Job
:HZAL
Counts :
Receiving…….
19.1.8 Receiving Vertical Curve Data
The vertical curve data can be transferred from computer to instrument by using character point and
chainage. The vertical curve data shoud consists of elevation, curve length. The start and end curve
length should be 0.
Data format:
Chainage, elevation, length
For example:
1000.000,50.000,0.000
1300.000,70.000,300.000
1800.000,70.000,300.000
2300.000,90.000,0.000
Operating Procedure
Operation
Display
1) Select “6. Receive VT AL” in the “define Roads”
screen.
Define Raods(1/2)
1. Edit HZ AL
2. Edit VT AL
3. HZ AL Import
4. VT AL Import
5. Receive HZ AL
6. Receive VT AL
