www.kolidainstrument.com
127
Operating Procedure
Operation
Display
Select “2. Known data” in the “Memory Mode
Screen” and press ENT to show the “Known Data
Screen”.
“2. Known
data”
+
ENT
Known Data
1. Key in Coord.
2. Coord. Import
3. Coord. Export
4. Coord. Receive
5. Coord. Send
6. Clear
Select “4. Coord. Receive” and press ENT. Start
data receiving. The received data amount is showed
on the bottom of the screen.
“4. Coord.
Receive”
+
OK
Receive Know Data
Transfer COM
Job FIX
Counts 20
Receiving....
Data receiving finished, display returns to known
data screen.
Known Data
1. Key in Coord.
2. Coord. Import
3. Coord. Export
4. Coord. Receive
5. Coord. Send
6. Clear
☆
Note
：
Before performing communication between total station and computer make sure that
their communication parameters should be same.
（
Refer to “21.1 Changing Instrument
Parameters”
）
20.2.5 Sending known point data to computer
Operation Procedure
Key
Display
1)
Under memory mode choose “2. Known
data”and press ENT to enter known data screen.
“2.Known
Data”
+
ENT
Known Data
1. Key in Coord.
2. Coord. Import
3. Coord. Export
4. Coord. Receive
5. Coord. Send
6. Clear
2)
Choose “5. Coord. Send”and press ENT.The
machine starts sending known data, then sending
data amount shows in the bottom of the screen.
“5.Coord.
Send”
+
ENT
Know Data Send
Transfer COM
Job FIX
Counts 20
Sending....
