www.kolidainstrument.com
114
20 SETTING IN MEMORY MODE
Memory Mode Screen
To enter Memory Mode, press MEM in the “Home Page Screen”
·
In Memory Mode, it is possible to perform settings
concerning JOB and memory.
·
JOB selection
·
Deleting a JOB
·
Registering Coordinate Data in Memory
·
Clearing Coordinate Data from Memory
·
Reviewing Coordinate data in memory
·
Inputting codes
·
Reviewing codes
·
Define and edit Road Data
·
Outputting JOB data to the computer
20.1 JOB Selection
20.1.1 Current JOB Selection
·
Before recording data, select the JOB which it is to be recorded in. The following data can be
recorded in JOB.
·
Measurement results
·
Instrument station data
·
Notes
Operating Procedure
Operation
Display
1)
Select “1. JOB” in the “Memory Mode Screen”
and press ENT (or press numeric key 1), the “JOB
Management Screen” is displayed.
“1.JOB”
+
ENT
Mem./JOB
（
1/2
）
1. JOB Selection
2. Coord. Read JOB
3. JOB Export
4. Coord. Import
5. Coord. Send
6. Coord. Receive
MEM
1. JOB
2. Known data
3. Code
4. Disk
5. Backup
6. Card reader
