www.kolidainstrument.com
59
3)
After inputting station data, press OK to enter
setting-out measurement menu. Select “4. Back
sight data” and press ENT (or press numeric key 4
directly) to enter Angle Setting screen.
(Set the bearing angle while referring to “10.2
Azimuth angle setting”. The setting-out
Measurement Menu screen is displayed.
“4.Back
sight
data”
+
ENT
S-O
1. Observation
2. Set-out
3. Stn data
4. Back sight data
4) Select “2. Set-out” and press ENT. Np, Ep, Zp
are the coordinates of the point to be set out, input
the known data to here. After each entry, press
ENT.
Stop entry in progress
：
ESC
Reading in data
：
READ
Recording data
：
REC
“2.Set-Ou
t”
+
ENT
S-O
Np 120.00m
Ep 110.00m
Zp 50.00m
Dist 123.00m
Ang.
150°16′54″
REC. READ R.HT OK
5)
After inputing above data, the required distance
and horizontal angle will be automatically calculated
and displayed on screen. Press OK to enter the
setting-out observation screen.
OK
S-O
SO. H
H
ZA 89°45′23″
HAR 150°16′54″
dHA -0°00′06″
REC. D/C
<-->
HD
6)
Perform the procedure from the step 5 to step 10
in “12.1 Distance Setting-out Measurement” to find
the point to be set out. To find the height of the point
to be set out, press D/C to display CRD.. Press
CRD. to begin Elevation Setting-out Measurement.
D/C
+
CRD.
S-O
SO. N 0.264m
SO. E -0.235m
SO. Z 0.402m
HAR 150°16′54″
dHA -0°00′06″
REC. D/C
<-->
CRD.
7)
When the measurement is completed, the
“Setting-out Observation Screen” is displayed. Press
<-->, then press CRD. to show the Setting-out
Guidance screen. The value which is displayed on
the fourth line is the height difference to the point to
be set out. The arrows which contain 2 triangles
show the required direction to move the prism.
(If you want the difference to the point displayed as
the coordinate values, press <--> again after
measurement is completed.
<-->
+
CRD.
S-O
← 13°48′29″
↑ 0.002m
↓ 0.402m
ZA 50°16′54″
HAR 150°16′54″
REC. D/C
<-->
CRD.
8) Press CRD., move the prism up and down to
display the height difference value to be 0 m
(When it is near 0 m, 2 arrows are displayed. ).
When the values which display on the second,
third, fourth lines are 0, the point to be setout is
found.
CRD.
S-O
→ 0°00′00″
↑ 0.000m
↑ 0.000m
ZA 50°16′54″
HAR 150°16′54″
REC. D/C
<-->
CRD.
