RMS compact
47
Figure 63: Enable Temp inputs & set Thresholds
As explained above, the threshold that will trigger the fan to switch on, is the UWL threshold, the threshold to
trigger the heater to switch on is the LWL threshold – therefore ensure that these are correct.
Setup logic
The next step is to setup the RMS compactlogic to perform the switch on of the fan or heater.
Depending upon which output the fan or heater is wired into, select the relevant logic block (we will use output 1
as an example – i.e the Fan triggered by
Temperature Upper Hysteresis
)
Once opened, select
Add new Input
from the drop down menu, and select
Temperature 1 Upper Hysteresis
(or Temperature 2 Hysteresis if required), as follows:
Figure 64: Select logic Input