RMS compact
42
Figure 54: SMS setup screen
This first thing to do is to setup the modem that is being used, by clicking on the
Setup Modem
button. This
should display the following screen:
Figure 55: Modem setup screen
Enter parameters for your modem including
Com Port, Baudrate, databits, Stopbits, Parity
& Modem
initialisation String.
The data format will depend upon the specific TAP bureau that is being used.
Once the modem is configured,
Save Values
and
Close
to return to the SMS setup screen. Back in the
SMS
Setup
window, enter an outside line access number if required, then enter the SMS TAP
Bureau Number
this
number should be obtained from your Network supplier. Enter a password for the bureau if required (it is rarely
required), then enter the mobile phone or pager number that you wish to send the message to, into the
Pager/Mobile ID Number
field.
The following screen shows an example, using the UK based O2 bureau: