RMS compact
31
Configuration using the RMS compact
Programmer Software
Introduction
RMS compact
Programmer is a custom designed viewing and management package for the RMS compact
unit.
It enables the user to configure and monitor the RMS compact
unit without the need for an NMS, (although RMS
compact
Programmer can also be used in conjunction with an NMS), and provides an intuitive Graphical User
Interface (GUI), with which the RMS compact
can be monitored and configured.
The RMS compact
Programmer uses SNMP and Java technologies to view and manage the RMS compact
,
and allows the user to monitor the state of the inputs and outputs.
System Requirements
The version of RMS compact
Programmer contained in this package supports systems running:
•
Windows 2000/XP/2003
The software also requires the following:
•
Connection to the network that the RMS compact
is connected to.
•
Internet Explorer 4 or above (To utilise its Java Runtime Environment) / Netscape Navigator 4.0 or above
•
The network address of the PC that the RMS compact
Programmer is running on must be entered into the
NMS table of the RMS compact
(see configuration section).
Installation
This section describes installation of the RMS compact
Programmer software on a Windows 2000/XP/2003
platform.
•
Insert the supplied CD-ROM ‘RMS compact Support Software’ and select the ‘RMS compact‘ directory,
followed by the ‘Programmer’ directory.
•
Select the ‘RMS Compact Install.exe’ file and run. Follow onscreen instructions.
Once installed, the program is started by selecting the ‘RMS compact
Programmer’ icon from the SINETICA
directory in the Start Menu.
Note:
Note:
Note:
Note:
The IP address of all PC’s accessing the RMS compact using the Viewer_Programmer software tool,
MUST be in the NMS table of the RMS Compact