RMS compact
35
This screen allows the user to configure the NAME of the digital Input, its NORMAL STATE (normally open or
normally closed), and it’s TYPE (i.e LEVEL, POSEDGE or NEGEDGE – see serial configurtaion section of this
manual for an explanation of each type)
Note:
Note:
Note:
Note:
It is not possible to use the vowel mutations
“Umlaut”
and
"ß"
for any of the input or output names
Temperature & Humidity Input Configuration
Selecting the
Analogue Inputs
section on the main configuration, will display the following screen:
Figure 44: Temperature & Humidity Input Configuration
From here, the user can set the THRESHOLDS for Temperature and Humidity limits, ENABLE OR DISABLE
Temperature or Humidity monitoring, change the NAMES of the Temperature & Humidity inputs and set a
CALIBRATION OFFSET.
Digital Input Trap Configuration
Selecting the
Trap Setup
window connected to the
Digital Inputs
window on the main configuration screen, will
display the following window:
Figure 45: Contact Closure Trap Configuration