RMS compact
23
•
Enter your Network Shutdown shutdown license key (this should have been provided with the RMS
compact if this feature was ordered).
•
Enter the IP addresses of the computers on the network you wish to shutdown
•
Setup the Power Fail and Low Battery timers to suit.
•
Exit and Save the configuration
Reset to Default Settings
This option resets the RMS compact
to factory presets. Selecting this menu item will display the following menu
options:
Knuerr RMS Compact ver 0.1.13
Embedded Agent Setup by Sinetica
1. Knuerr Default Settings
2. Exit Setup
Enter choice (ESC to exit):
Figure 30 Restoring default settings menu 1
If menu item 1 is selected, the following confirmation is requested:
Knuerr RMS Compact ver 0.1.13
Embedded Agent Setup by Sinetica
===============================================
WARNING THIS WILL OVERWRITE ALL CURRENT VALUES
AND WILL SET THE EEPROM TO THE DEFAULT SETTINGS
===============================================
Enter 1 to ignore 2 to proceed.
Enter choice (ESC to exit):
Figure 31 Restoring default settings menu 2
Restoring default settings will set all parameters within the RMS compact to those used during the testing of the
unit, this includes default IP information for both the RMS itself and for NMS and Trap receiver. Other default
settings include
•
Telnet enabled with default password of
knuerr
•
HTTP access enabled with default user name of
admin
and a password
knuerr
•
Temperature and humidity monitoring enabled on both ports
•
Default Contact Closure names with a default state of normally
open
and type
level
with all traps
disabled
•
No output Boolean logic configured
Set Output and Boolean Settings
This section is used to setup the configuration of the digital outputs, along with the Boolean logic, which drives
these outputs. Selecting option
9
from the main menu displays the following screen:
Knuerr RMS compact version X.X.X
Embedded Agent Setup
1. Set Boolean values
2. Set Output values
3. Exit output/boolean menu
Enter choice (ESC to exit):
Figure 32 Boolean Logic Configuration Screen