RMS compact
11
Installation
Fitting into the 19” rack
There are two ways of mounting RMS compact into a 19” rack system. These are explained below:
Using the 1U frontplate adapter
•
Unpack the RMS compact from its packaging.
•
Attach the 1U frontplate to the RMS compact as follows:
1. Remove the 3 fixing screws from the front of the top of the RMS compact
2. Slide the 19” adapter plate over the front of the unit, and replace the fixing screws. The diagram below
shows the position of these screws:
Figure 6: Mounting the 19" Adapter frontplate
and bolt into the 19” racking. The following diagrams shows how this is done:
Figure 7: RMS Compact with 19" front plate, rack mounted (Front View)
Fixing Screw
Fixing Screw
Fixing Screw
Fixing Bolts