RMS compact
27
1. Network Configuration
2. Net Access Configuration
3. NMS Configuration
4. Trap Host Configuration
5. Temp & Humidity Configuration
6. Contact Closure Configuration
7. Shutdown Targets Configuration
8. Restore Default Settings
9. Set Output and Boolean Settings
10. Exit Setup
Enter choice (ESC to exit): 10
*** WARNING *** Configuration changed
Esc to ignore changes, 1 to use for this session, 2 save:
Figure 33 Exit setup Messages For Configuration
The user can choose to save or discard changes made.
Note:
Note:
Note:
Note:
Changes must be saved to take effect (select ‘Exit setup’ followed by (2) to save).
When configuration complete, remove power & turn DIP switch 1 on the RMS compact
from the DOWN
(ON) position to the UP (OFF) position