RMS compact
43
Figure 56: Example SMS setup
The
Standard CR
field will also depend on whether the bureau supports standard Carriage Return or Carriage
Return and Line Feed – again, the bureau supplier should be able to tell you this.
It is possible to send a
Test Message
to check your configuration details. Just enter a message in the
Test
Message
field, and hit the
Send Message
button.
If the Test Message is successfully received, then you can now go onto configuring the Viewer software to send
an SMS message for specific alarms, using the
Configure Actions
feature as explained in the following
section.
Logfiles
This screen gives the option to setup logfiles for values and for alarms (and to set a maximum logfile size).
There are two types of data logging that the user can perform, these are
Values
and
Alarms.
Figure 57: Advanced Features
Values Logging
If Values logging is selected (i.e. a logging filename is provided), then a ‘snapshot’ of the status of the RMS
compactwill be logged to a file every time the unit is polled. The status of all inputs will be logged on each poll.
For example:
11/09/2002 15:00:00 GMT
Contact_1 normal
Contact 2
normal
Contact 3
normal
Contact 4
normal
Contact 5
normal
Contact 6
normal
Contact 7
normal
Contact 8
normal
Temperature1 Warning
22.5°C
Humidity1 Warning
40.6%
Temperature2 Warning
22.9°C
Humidity2 Warning
37.3%
Figure 58: Values Logfile