QUICK REFERENCE GUIDE: KI27400 / KI23400 SERIES 2-WAY LOSS LEST METER
KI23400/KI27400 UM-2
-
95 -
•
[For data saved in Meter mode only]: To toggle display to
show absolute power in dBm or in both dBm & watt, press
F3
repeatedly.
To view saved time and date, press and hold
Toggle
Centre
.
To exit memory mode, press
F1
.
To retest or overwrite results
•
Note currently displayed memory location: At Main menu,
press button
above “
MEMORY
”
. Note current memory
location
e.g. “MEM 123”
.
•
Go to the memory location for retest/overwrite, select
desired location using
+
or
-
, then hold down button above
“
MEMORY
”
and press
F2
for three seconds or until it stops
beeping.
•
Press
F1
to exit Memory mode.
•
To retest: Press
F3
(Meter mode) or
F4
(Autotest mode) to
return to data acquiring mode. Press button above [STORE]
now will save new results in the memory location selected
above.
•
Return memory location pointer for next storage to where it
was before the retest: Press button below [HOME] then that
above “
MEMORY
”
, select the desired location
(“MEM
124
”
in this example) using
+
or
-
, then hold down button above
“
MEMORY
”
and press
F2
for three seconds or until it stops
beeping.
•
Continue testing.
Clearing Memory
•
To clear
all stored data
, in Memory mode, hold down button
above
“
MEMORY
”
, then press and hold
F2
followed by
F4
until it stops beeping.
Transfer Instrument Memory Data to USB Stick:
•
At main menu, press button above
“
MEMORY
”
to enter
memory mode.
•
Insert USB stick into USB port (
“MEM”
) on the right side of
the instrument and, press triangular button above
“
USB
”
.
Wait till instrument stop beeping.
Pass/Fail Operation:
•
Loss test status for each wavelength will be shown with a
‘
✓
’ (pass)
or
‘X’(fail)
or alternating
‘
✓
’
/
‘X’ (marginal)
on
LCD. A failed length test value (only in 2-way Autotest) will
flash.
•
Overall test result,
“PASS” will
be shown if:
-
pass/fail check function is disabled.
