DECLARATION OF CONFORMITY
IN ACCORDANCE WITH ISO/IEC 17050:2004
Manufacturer’s Name:
Kingfisher International Pty. Ltd.
Manufacturer’s Address:
720 Springvale Road, Mulgrave, Victoria 3170, Australia
hereby declares, that the products listed below
Product Name:
Optical Power Meter, Optical Light Source, Optical Loss Test Set
Model Number:
KI2000 Series
Product Options:
This declaration covers all options of the above product(s)
complies with the essential requirements of the applicable European Directives:
•
Low Voltage Directive 2014/35/UE and the EMC Directive 2014/30/UE, and carries the CE marking accordingly
•
Directive 2011/65/EU on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS)
•
Directive 2012/19/EU on waste electrical and electronic equipment (WEEE). The instrument can be disposed of local retail shop with
WEEE collection point.
and conform to the following standards and specifications:
MIL-PRF-28800F:1996 Performance specification -Test equipment for use with electrical and electronic equipment, general specification
IEC 60529 Ed. 2.2 / EN 60529:1991 Degrees of protection provided by enclosures
Power Meter conforms to:
IEC 61315 Ed. 2.0 Calibration of fibre-optic power meters
EMC
Limit
IEC 61326-1 Ed. 2.0 / EN 61326-1:2013
IEC CISPR 11 Ed. 6.1 / EN 55011:2016
Limits applicable to Group 1 Class B equipment
IEC CISPR 16-1:2004~2019
Limits applicable to Class B equipment
IEC CISPR 16-2:2003~2016
Limits applicable to Class B equipment
IEC 61000-3-2 Ed. 5.0 (2018) / EN 61000-3-2:2014
IEC 61000-3-3 Ed. 3.1(2017) / EN 61000-3-3:2013
IEC 61000-4-2 Ed. 2.0 (2008) / EN 61000-4-2:2009
4kV CD, 8kV AD
IEC 61000-4-3 Ed. 3.2 / EN 61000-4-3:2006
3V/m, 80-1000MHz
IEC 61000-4-4 Ed. 3.0 / EN 61000-4-4:2012
1kV signal lines, 2kV power lines
IEC 61000-4-5Ed. 3.1 / EN 61000-4-5:2014
1kV line-line, 2kV line-ground
IEC 61000-4-6 Ed. 4.0 / EN 61000-4-6:2014
3V, 0.15-80 MHz
IEC 61000-4-11 Ed. 2.1 / EN 61000-4-11:2004
0.5 cycle/100%/each polarity
ICES-001: 2006 (Canada)
CFR 47 FCC Part 15, Subpart B (Exempted devices) (USA)
Safety
Light Source
conforms to:
IEC 60825-1:2014 Safety of laser products - Equipment classification,
requirements and user’s guide
IEC 60825-2:2004 Safety of laser products - Safety of optical fibre communication systems (OFCS)
CFR 21part 1040.10 (USA) Performance standards for light- emitting products-Laser products
Supplemental Information:
The product was tested in a typical configuration with Kingfisher International test systems.
17 March 2020
Date
Bruce Robertson
Name
Technical Director
Title
Revision: F
Issue Date: 17 March 2020
