SETTING DATE AND TIME
KI23400/KI27400 UM-2
-
27 -
Setting Time & Date
Test date and time are stored with test results. So, if the instrument
memory is used to record results, the user probably wants to set the
correct date and time.
If the instrument loses power or battery condition for more than a
minute, current date and time will be lost and will need to be re-
entered. In this case, the time & date entry screen will show at power
on.
At start up, if the instrument needs this setting to be entered, the
“setting time and date” screen will appear so they can be re
-entered.
Or typically at start up, the instrument shows current date and time.
To avoid international confusion, the date / time format is:
“Jan 02
-24 hr time- 2020
”
Setting time and date:
•
Turn on instrument while holding down
Toggle centre
.
(Bottom row, large square button in the middle).
•
To modify the selected (flashing) item, press
-
or
+
.
•
To change selected item, press
Toggle centre
.
•
To save new time and date settings, press button below
[Save] (
F2)
.
•
To exit without saving new settings, press button below
[Cancel] (
F1)
.
