TEST REPORTING OVERVIEW
KI23400/KI27400 UM-2
-
48 -
Test Recording & Reporting Overview
These instruments can be used various ways to record results and get
test reports. Typically:
•
If the instrument is connected to a computer during testing,
the instrument is controlled from the computer via
KITS™
software, and test results are loaded directly into a
KITS™
pass/fail report during testing. This is a very convenient
option. No need to use the instrument memory, or even the
instrument buttons in most cases.. Or just save the Excel file
and print the test report.
•
If working into instrument memory, then later, you can dump
the test data onto a USB key, and then load this data file
later (often, off-site) into
KITS™
software. This can be handy
to get data offsite, allow test data analysis as the job is
completed, create duplicate test file back-ups, or allow for
effectively endless test memory.
•
If working into memory, you can download the results later
into
KITS™
reporting software. This is the only method
allowed by most competitor equipment.
•
Note that all data files are secured with a checksum, and
KITS™
software can run in “secure mode”, which prevents
tampering with test results.
•
More detailed operation and instructions are elsewhere in
this manual, or the
KITS™
software manual.
•
KITS™
software can perform an unformatted data download
for any other analysis by the user.
•
Data in
KITS™
can be exported to a secure CSV file for
audit purposes.
•
KITS™
software can be readily updated with your in-house
or other latest test standards.
