QUICK REFERENCE GUIDE: KI27400 / KI23400 SERIES 2-WAY LOSS LEST METER
KI23400/KI27400 UM-2
-
94 -
•
For far-end unit to respond to near-end unit: Press
F4
on far-
end unit. Near-end instrument will
beep once and, “HOLD”
will stop flashing (display update resumes) on both units.
Autotest Wavelength Restriction:
•
To start Autotest with restricted wavelengths,
Method 1
(for instrument with 2 light source ports only),
▪
To start Autotest for single mode
λ
(left source port),
hold down
-
and press
F4
.
▪
To start Autotest for multimode mode
λ
(right source
port), hold down
+
and press
F4
.
Method 2
,
▪
To activate (include) / deactivate (exclude)
wavelength/s for Autotest, press
F1
in Home menu,
then press
–
or
+
to select the wavelength/s. Hold
F4
then press
Toggle Centre
to change between ‘in’
(activated) or ‘out’ (deactivated).
▪
To start Autotest for the activated wavelength/s only,
hold
Toggle Centre
then press
F4
.
Memory Operation:
Recording Data to Memory
•
In METER or AUTO mode, press triangular button above
“
STORE
”
.
•
To change the next location pointer for storage, press button
above
“
MEMORY
”
at Home menu, select desired location
using the
+
or
-
, hold button above
“
MEMORY
”
then press
F2
for three seconds, or until it stops beeping.
Recalling Stored Data from Memory
•
To enter Memory mode, press button above
“
MEMORY
”
at
Main menu.
•
To select a memory location to display data, press
+
or
-
.
•
[For data saved in 2-way Autotest mode only]: To toggle
display to show summary or detail data of test results, press
F3
repeatedly.
To show nominal source power, hold down
left
rectangular
button above LCD (only when display shows detail data).
To view detail data for other wavelengths, press
F4
.
To view saved time and date, press and hold
Toggle
Centre
.
To exit memory mode, press
F1
.
•
[For data saved in 1-way Autotest mode only]: To toggle
display to show absolute power in dBm or in both dBm and
watt, press
F3
repeatedly.
To show nominal source power, hold down
left
rectangular
button above LCD.
To view saved time and date, press and hold
Toggle
Centre
.
To exit memory mode, press button below [HOME].
