Kikusui PLZ-30F, Operation Manuals

Page: 38 / 192

3-6 Names and Functions of Parts PLZ-U
[15-4] DUTY/RPT key
DUTY
Press this key to set the duty cycle of switching mode on the selected channel.
RPT
Press this key to set the number of program loops on the selected channel.
[16] Slew rate, soft start, etc.
[16-1] SLEW RATE/S.START key
SLEW RATE
Press this key to set the slew rate on the selected channel.
S.START
Press this key while holding down the SHIFT key (SHIFT + SLEW RATE) to set
the soft start time on the selected channel.
[16-2] OCP/OPP key
OCP
Press this key to set the overcurrent (OCP) value on the selected channel.
OPP
Press this key while holding down the SHIFT key (SHIFT + OCP) to set the over-
power protection (OPP) value on the selected channel.
[17] EXT, RMT, and KEY LOCK indicators
EXT
Illuminates when the PLZ-U is being controlled using FRAM CONT on the rear
panel.
RMT
Illuminates in remote control mode.
KEY LOCK
Illuminates when the keys are locked.
[18] RECALL/STORE function, etc.
[18-1] RECALL/STORE key
RECALL
Recalls the panel settings saved to the setup memory. When you press this key, the
key illuminates, and the memory number is displayed in the setting display. Set the
memory number using the rotary knob.