Kikusui PLZ-30F, Operation Manuals

Page: 112 / 192

6-20 Remote Control PLZ-U
Setting the slew rate
For details on the slew rate setting, see section 5.4, “Setting the Slew Rate.”
• The slew rate can be set to a value outside the speci fi cations, but it is actually lim-
ited to a value within the speci fi cations of the PLZ-U.
CURR:SLEW
Sets the amount of current change per unit time. Or, queries the current setting.
Set command: [SOURce:]CURRent:SLEW <slew>
Query command: [SOURce:]CURRent:SLEW?
• Program data <slew>
Value
Resolution 0.01
Unit A/US
Setting protection levels
CURR:PROT
Sets the overcurrent protection. Or, queries the current setting.
Set command: [SOURce:]CURRent
:PROTection[:LEVel][:OVER]
{<value>|MINimum|MAXimum}
Query command: [SOURce:]CURRent
:PROTection[:LEVel][:OVER]?
• Program data
Unit A
Operation mode Range PLZ150U PLZ70UA
CC
H 0.10 to 2.40 0.05 to 1.20
M 0.10 to 0.24 0.05 to 0.12
L ( fi xed) 24 m 12 m
CR
H 0.10 to 0.24 0.05 to 0.12
M ( fi xed) 24 m 12 m
L ( fi xed) 2.4 m 1.2 m
PLZ150U PLZ70UA
Selectable range 0 to 33.00 0 to 16.5
Resolution 10 m 10 m
NOTE