Kikusui PLZ-30F, Operation Manuals

Page: 113 / 192

PLZ-U Remote Control 6-21
CURR:PROT:ACT
Sets whether to turn off the load or limit the current when the OCP trips. Or, queries
the current setting.
Set command: [SOURce:]CURRent:PROTection
:ACTion {LIMit|TRIP}
Query command: [SOURce:]CURRent:PROTection:ACTion?
• Program data
Value LIMit: Limit the current when the OCP trips.
TRIP: Turn off the load when the OCP trips.
POW:PROT
Sets the overpower protection. Or, queries the current setting.
Set command: [SOURce:]POWer:PROTetion[:LEVel]
[:OVER] {<value>|MINimum|MAXimum}
Query command: [SOURce:]POWer:PROTection[:LEVel]
[:OVER]?
• Program data
Unit W
POW:PROT:ACT
Sets whether to turn off the load or limit the power when the OPP trips. Or, queries
the current setting.
Set command:
[SOURce:]POWer:PROTection:ACTion
{LIMit|TRIP}
Query command: [SOURce:]POWer:PROTection:ACTion?
• Program data
Value LIMit: Limit the current when the OPP trips.
TRIP: Turn off the load when the OPP trips.
VOLT:PROT:UND
Sets the undervoltage protection. Or, queries the current setting.
Set command: [SOURce:]VOLTage:PROTection[:LEVel]
UNDer {<voltage>|MINimum|MAXimum}
Query command: [SOURce:]VOLTage:PROTection[:LEVel]
UNDer?
VOLT:PROT:STAT
Turns ON/OFF the undervoltage protection. Or, queries the current setting.
Set command: [SOURce:]VOLTage:PROTection:STATe
{OFF|ON|0|1}
Query command: [SOURce:]VOLTage:PROTection:STATe?
• Program data
Value ON(1): Undervoltage protection on
OFF(0): Undervoltage protection off
PLZ150U PLZ70UA
Selectable range 0 to 165.0 0 to 82.5
Resolution 100 m 100 m