Kikusui PLZ-30F, Operation Manuals

Page: 161 / 192

PLZ-U Appendix A-1
Appendix
The appendices cover the operating area of the PLZ-U, the basic operation modes,
sequence program creation table, SCPI command reference, and error messages.
A.1 Operating Area of the PLZ-U
As shown in Fig. A-1, the PLZ-U can be used within the area enclosed by the con-
stant voltage line according to the rated voltage (L1), the constant power line
according to the rated power (L2), the constant current line according to the rated
current (L3), and the constant voltage line according to the minimum operating
voltage (L4) (area indicated in dark gray: operating area where speci
fi cations are
guaranteed). For PLZ-Us with the minimum operating voltage of 0 V, the speci fi ca-
tions are guaranteed at input voltages at 0 V and greater. For 1.5 V input types, the
speci
fi cations are guaranteed at input voltages of 1.5 V and greater. If the current is
decreased, these types can be used even at voltages lower than 1.5 V (area indicated
in light gray: actual operating area). However, the speci
fi cations are not guaranteed.
For the operating areas of each individual model, see appendix A.3, “Operating
Area of Each Model.”
Fig.A-1 Operating area
PLZ150U
(1.5 V input type)
H range
PLZ70UA
(0 V input type)
H range
0.1
1
10
100
0.1 1 10
Input current [A]
Input voltage [V]
Operating area where
specifications are guaranteed
Actual operating area
150W
150
5
1.5
1.1 30
Logarithmic
scale
L1
L2
L3
L4
0
0.5
1
0 10
Input current [A]
Input voltage [V]
1.5
2.0
1.1
20 30
L3
L4
Low voltage area
Operating area where
specifications are guaranteed
Actual operating area
Low-voltage area
<
1.5 V
Logarithmic
scale
0.1
1
10
100
0.1 1 10
70W
150
5
1.1 15
L1
L2
L3
L4
0
0.5
1
0 5
1.5
2.0
1.1
10 15
L3
Operating area where
specifications are guaranteed
Operating area where
specifications are guaranteed
Input voltage [V] Input voltage [V]
Input current [A] Input current [A]
Low voltage area