Kikusui PFX2500 Series, Operation Manual

Page: 55 / 144

PFX2512
55
Connecting to a PC
3
P
C
C
o
n
n
e
c
ti
o
n
an
d
H
a
rd
ware
C
o
n
fi
g
u
rat
io
n
Using a fixed IP address
(connecting directly or through a switching hub)
If the IP address is already decided, you can connect using a fixed IP address.
You can connect directly (a single unit) or connect through a switching hub (multiple units).
Connecting directly to a PC (only when using a single unit)
If you will use only a single unit, use a LAN cable to connect it to the PC.
Connecting units through a switching hub (when using multiple units)
If you will use multiple units, use LAN cables to connect them to the PC through a switching hub.
p. 46
Be sure to set the channel numbers with the S1 switch on the rear panel before connecting them.
■
Recommended switching hubs
PC
LAN cable
PFX2512
To the LAN port
PFX2512
See
Model Manufacturer Number of
ports Note
LSW4-TX-5NS/ WHD BUFFALO INC. 5 Internal power supply type
Can be mounted on a surface with magnets
ETX-ESH16NC I-O DATA DEVICE, INC. 16 Internal power supply type; metal case
Can be mounted on a 19-inch rack
To the
switching hub
PC
Switching hub
LAN cable
LAN cable
PFX2512
To the LAN port
PFX2512