Kikusui PFX2500 Series, Operation Manual

Page: 28 / 144

28
PFX2512
Connecting the Power Cord
The PFX2512 conforms to IEC Overvoltage Category II (energy-consuming equipment that is
supplied from a fixed installation).
Connecting the power cord with a plug
In addition to the supplied power cord, Kikusui also provides other 200 V power cords with plugs
(sold separately).
1
Check that the AC power line meets the nominal input rating of the PFX2512.
The PFX2512 can receive a nominal line voltage in the range of 100 Vac to 240 Vac at
50 Hz or 60 Hz.
2
Check that the POWER switch is turned off.
3
The power cord of the should be connected with the AC INPUT inlet of a rear
panel of equipment.
4
To ensure the safety charge and discharge testing, the power cord of the all
connected equipments should be connected to the outlet with the same
ground terminal.
Protect the malfunction in such case when the AC power line is shut down.
WARNING
Risk of electric shock.
• The PFX2512 conforms to IEC Safety Class I (equipment that has a protective conductor
terminal). Be sure to earth ground the product to prevent electric shock.
• The PFX2512 is grounded by the earth wire of the AC power cable. Connect the ground
terminal to earth ground.
• Use the supplied power cord to connect to an AC power line.
If the supplied power cord cannot be used because the rated voltage or the plug shape is
incompatible, have a qualified engineer replace it with an appropriate power cord that is 3 m or
less in length. If obtaining an appropriate power cord is difficult, consult your Kikusui agent or
distributor.
• A power cord with a plug can be used to disconnect the PFX2512 from the AC line in an
emergency. Connect the plug to an easily accessible power outlet so that the plug can be
removed from the outlet at any time. Be sure to provide adequate clearance around the power
outlet.
• Do not use the supplied power cord for other devices.
• It may cause a damage of the test data or a malfunction of the product, please connect the
power cable of each equipment to the same outlet.