Kikusui PFX2500 Series, Operation Manual

Page: 3 / 144

PFX2512
3
Check that all accessories are included and that the main unit and
accessories have not been damaged during transportation.
If the main unit or any of the accessories are damaged or missing,
contact your Kikusui agent or distributor.
We recommend that you save all packing materials, in case the
PFX2512 needs to be transported at a later date.
To configure a system, the following cables are necessary in
addition to the included cables.
These cables are available as options (sold separately).
• DUT cable (+•–) (for connecting the DUT): 80 mm
2
• Sensing cable (voltage / temperature sensing cable)
• I/F cable for PWR-01 DC power supply
• I/F cable for PLZ-5W Electronic load
Make the cables as short as possible by considering the loss in the
cables ( p. 21 ) according to your system configuration.
If cables are to be connected in a system configuration shown in
“Connecting the devices” on page 32, you can use the optional
cable set.
Use it as a guide in selecting the cables.
For information about options, contact your Kikusui agent or
distributor.
• Cable set ( p. 123 )
• I/F cable for PWR-01 DC power supply ( p. 124 )
• I/F cable for PLZ-5W Electronic load ( p. 124 )
Checking the Package Contents
or
or
Power cord (1 pc.)
Length: Approx. 2.5 m
Operation manual
(This manual, 1 copy)
LAN cable (1 pc.)
Straight type
[ ]
Cable with solderless terminal (4 pcs.)
Red (2 pc.) : 91-80-7557
White (2 pc.) : 91-80-7522
Thermistor (1 pc.)
[38-00-0160]
Sensing connector (1 pc.)
[84-61-7705]
26-core flat cable (1 pc.)
(I/F cable for PWR400L/
PWR800L/ PWR1600L/ PAS
DC Power Supplies)
[83-22-6050] 20-core flat cable (1 pc.)
(I/F cable for PLZ-4W Electronic
Load) [91-80-6136]
Lock lever (2 pcs.)
[83-06-5060]
The power cord that is provided varies
depending on the destination for the
product at the factory-shipment.
PLUG: NEMA5-15
Rating: 125 Vac/ 10 A
[85-AA-0003]
[85-10-1070]
PLUG: CEE7/7
Rating: 250 Vac/ 10 A
[85-10-0791]
PLUG: GB1002
Rating: 250 Vac/ 10 A
Ferrite core for
26-core flat cable (1 pc.)
[96-01-0260]
Ferrite core for
20-core flat cable (1 pc.)
[96-01-0250]
Model Description Length Quan
tity
TL08-PFX DUT cable
(For connecting the DUT: +•– )
[Solderless terminal: M6–M6] Approx.
5 m 1 pc.
Sensing cable
(voltage / temperature sensing
cable: already assembled)
Model Description Length Quan
tity
SC07-PFX I/F cable
For between a PFX2512 and PWR-01 Approx.
1 m 1 pc.
Model Description Length Quan
tity
SC05-PFX I/F cable
For between a PFX2512 and PLZ-5W Approx.
1 m 1 pc.
M8x18 screw set 2 sets
Cables required for system configuration
See
See
See
See