Kikusui PFX2500 Series, Operation Manual

Page: 108 / 144

108
PFX2512
Preparing to Connect the DUT (Battery)
Cables
1
for connecting the OP03-PFX and the input terminal to the DUT (battery) are not included.
Prepare the following cables.
■
Cables and tools that are necessary to make the connection
1
The TL11-PFX / TL12-PFX [CE compliant product] option consists of a dedicated voltage
sensing cable and thermocouple for connecting the DUT (battery) to a PFX2512 in which an
OP03-PFX is installed. (
p. 123 , p. 123
) See
Wire DUT cable Cable for running charge/discharge current between the PFX2512
and DUT (battery)
p. 41
Voltage sensing cable Cable for sensing the electrode voltage of the DUT (battery)
Cell voltage sensing
cable Cable for sensing the cell electrode voltage of the DUT (battery)
0.20 mm
2
(AWG24) to 0.52 mm
2
(AWG20), shielded cable
Flat-blade screwdriver Shaft diameter: Ø3, blade tip width: 2.6 mm
Wire stripper A wire stripper that matches the wires listed above
See
+ – + – + – + – + – + – + – + –
OP03-PFX
Cell voltage sensing cable (shielded cable)
Cell V
Term1 Cell V
Term2 Cell V
Term3 Cell V
Term4 Cell V
Term5 Cell V
Term6 Cell V
Term7 Cell V
Term8
SL01-PFX
The DUT (battery)
Example of connecting the DUT (battery) to an SL01-PFX after installing an Voltmeter Unit OP03-PFX