Kikusui PFX2500 Series, Operation Manual

Page: 33 / 144

PFX2512
33
2
C
o
nnec
ting and C
o
nfiguring De
vic
e
s
Connecting to DC Power Supplies
p. 25
Connect the PFX2512 to the DC power supply using the cable with the solderless terminal and the
I/F cable. This section explains an example of connecting a Kikusui PWR-01 Regulated DC Power
Supply (L type, ML type) using the optional SC007-PFX I/F cable for the PWR-01.
For wiring precautions and other items to be considered, see the DC power supply operation
manual.
Connecting the PFX2512 to a DC power supply
1
Confirm that the POWER switch of all connected equipments are turned off.
2
Connect the cable with the solderless terminal to the DC PS + and the DC PS-
on the input/output terminal of the PFX2512. The solderless terminal (M6)
with a red cap is connected to the DC PS + terminal, and the solderless
terminal (M6) with a white cap is connected to the DC PS - terminal.
Pull out the cable in horizontal angle and fix it by screws.
3
Remove the chassis wire when it is connected the output terminal of the DC
power supply.
The output of the DC power supply is used as floating.
See
Screw (M6x14)
Tightening torque: 3.0 N
・
m
To DC power supply
– terminal
To DC power supply
+ terminal
Cable with M6 solderless terminal (+: Red)
Cable with M6
solderless
terminal (–: White)