Kikusui PFX2500 Series, Operation Manual

Page: 109 / 144

PFX2512
109
Preparing to Connect the DUT (Battery)
7
8Slot Unit (
O
ption) /
V
o
lt
met
e
r Unit (
O
ption)
■
Input terminal (connector MC1.5/10-G: Phoenix Contact)
When the PFX2512 is shipped from the factory, connectors are
attached to the input terminals. If they are damaged or lost,
contact your Kikusui agent or distributor.
Using AWG 24 to 20 (0.20 mm
2
to 0.52 mm
2
) cables, construct the following cable assembly.
Voltage measurement (Voltage sensing)
Terminal
number Signal Description
— FG Shield electric potential
8
Cell V Term8+ Cell voltage sensing connection terminal 8+
Cell V Term8- Cell voltage sensing connection terminal 8-
7
Cell V Term7+ Cell voltage sensing connection terminal 7+
Cell V Term7- Cell voltage sensing connection terminal 7-
6
Cell V Term6+ Cell voltage sensing connection terminal 6+
Cell V Term6- Cell voltage sensing connection terminal 6-
5
Cell V Term5+ Cell voltage sensing connection terminal 5+
Cell V Term5- Cell voltage sensing connection terminal 5-
— FG Shield electric potential
Terminal
number Signal Description
— FG Shield electric potential
4
Cell V Term4+ Cell voltage sensing connection terminal 4+
Cell V Term4- Cell voltage sensing connection terminal 4-
3
Cell V Term3+ Cell voltage sensing connection terminal 3+
Cell V Term3- Cell voltage sensing connection terminal 3-
2
Cell V Term2+ Cell voltage sensing connection terminal 2+
Cell V Term2- Cell voltage sensing connection terminal 2-
1
Cell V Term1+ Cell voltage sensing connection terminal 1+
Cell V Term1- Cell voltage sensing connection terminal 1-
— FG Shield electric potential
84-61-7910
Insert the wire while you
press this part down with a
flat-blade screwdriver. Remove the first
7 mm of the
wire’s insulation,
and then insert
the wire here.
Incorrect
Incorrect Correct
The wire itself is
in contact with the
chassis.
Sensing connector plug
Wire scraps are
in contact with the
chassis.
STRIP-GAUGE
7 mm