Kikusui PFX2500 Series, Operation Manual

Page: 88 / 144

88
PFX2512
Preparing to Connect the DUT (Battery)
Cables
1
for connecting the OP02-PFX and the input terminal to the DUT (battery) are not included.
Prepare the following cables.
■
Cables and tools that are necessary to make the connection
1
The TL09-PFX option consists of a dedicated voltage sensing cable and thermocouple for
connecting the DUT (battery) to a PFX2512 in which an OP02-PFX is installed. (
p. 123
)
See
Cable DUT cable Cable for running charge/discharge current between the PFX2512
and DUT (battery)
p. 41
Voltage sensing cable Cable for sensing the electrode voltage of the DUT (battery)
Temperature sensing cable Cable for sensing the temperature of the DUT (battery)
Thermocouple (type K)
Element-wire diameter: 0.20 mm
2
or more
Cell voltage sensing
cable Cable for sensing the cell electrode voltage of the DUT (battery)
cable 0.20 mm
2
(AWG24) to 0.52 mm
2
(AWG20), shielded cable
Flat-blade screwdriver Core diameter: Ø3, tip width: 2.6 mm
Wire stripper A wire stripper that matches the wires listed above
See
Example of an Volt/Thermometer Unit OP02-PFX installed in slot 1;
only the wiring between the PFX2512 and the DUT (battery) is shown
+
–
+
–
+
–
+
–
+
–
+
S
–
S
+
T
–
T
OP02-PFX
DUT
cable
Thermocouple (5 m max.)
Cell voltage
Sensing
cable
(shielded cables)
Thermistor
Cell V Term1 Cell V Term2 Cell V Term3 Cell V Term4
Voltage sensing
cable (shielded cables)
Temperature
sensing cable
(shielded cables)
PFX2512